Table of Contents
Advertisement
The Picture Quality Menu
Setting the Picture Mode with the PRESETS Option
The monitor has preset viewing modes that can be selected depending on your viewing
environment. Each preset mode has the contrast, brightness and sharpness adjusted for a specific
viewing situation.
•
MEMORY – This mode allows you to set and save your own pictur e adjustments.
•
SOFT – Use this mode when watching your Monitor in a dark r oom. Soft mode provides a
darker, finer picture, like the screen in movie theaters. These settings ar e preset for you and
can't be changed.
•
BRIGHT – Use this mode when watching your monitor in a bright r oom. This mode provides a
picture with distinct differences between light and dark ar e as. These settings are preset for you
and can't be changed.
•
NORMAL – The factory default.
To change the picture mode:
MAIN MENU
PICTURE QUALITY
AUDIO
SCREEN
FUNCTION
OPTIONS
SETUP
AUTOTUNING SETUP
SEL.
This is the main menu with the PICTURE
QUALITY option highlighted. Press OK to
bring up the highlighted menu.
Chapter 6
OK
EXIT
1. From the main menu, select PICTURE QUALITY . The PICTURE
QUALITY Menu will appear .
2. Highlight the PRESETS option and pr e ss the
select it. The PRESETS window appears.
3. Use the
button on the r e mote to select the desir ed mode. The
mode switches as follows when the
Note: If you don't push the
selection is set and the previous screen reappears.
Once you've selected the desir ed mode, press OK or MENU. The pictur e
mode is now set and you ar e returned to the PICTURE QUALITY scr e en.
If you are using MEMORY mode, you can manually adjust the pictur e
settings (contrast, black level, and sharpness). Y ou can continue adjusting
settings in the PICTURE QUALITY menu, r e turn to the main menu, or
exit the menu system.
To return to the main menu, pr e ss the GO BACK button on the r e mote.
To exit the menu system, pr e ss CLEAR.
The Menu System
button is pressed:
button within 5 seconds, the current
key on the r e mote to
25
Advertisement
Table of Contents
