Table of Contents
Advertisement
The Menu System
Reducing Noise in the Picture
Noise is a term used to describe extraneous bits of infor m ation in the signal that af f ect the
clearness of the picture. You can use the Noise Reduction (NOISE REDUCE) setting if your
reception is poor or when playing video tapes that have poor pictur e quality.
The NOISE REDUCE option has four settings, including OFF . The higher the setting, the str o nger
the effect. The settings switch as follows when the
PICTURE QUALITY
CONTRAST
BLACK LEVEL
SHARPNESS
COLOR
TINT
PRESETS
COLOR TEMP.
NOISE REDUCE
ADJ.
SEL.
This is the PICTURE QUALITY menu with the
NOISE REDUCE (noise reduction) option
highlighted.
NOISE REDUCE
This is the NOISE REDUCE (noise reduction)
screen.
28
R
G
: MEMORY
: WARM
:
HIGH
RETURN
:
HIGH
button is pressed:
To change the noise r e duction setting:
1. From the PICTURE QUALITY menu, highlight the NOISE REDUCE
option, and select it by pr e ssing the
SCREEN is displayed.
2. Use the
and
buttons to select the desir e d noise reduction
setting.
NOTE: If you don't push the
current setting is accepted and the previous screen reappears.
3. When the desired setting is displayed, pr ess OK to return to the
PICTURE QUALITY menu. Y ou can continue adjusting pictur e
settings, return to the main menu, or pr e ss CLEAR to exit the menu
system.
button. The NOISE REDUCE
or
button within 5 seconds, the
Chapter 6
Advertisement
Table of Contents
