The Multi-Screen Feature - RCA Scenium PHD50300 User Manual

The Multi-Screen Feature

The Multi-Screen feature is used to show either a single pictur e or two pictures on the screen at the
same time.
SINGLE – Displays a single pictur e on the screen.
SIDE BY SIDE – Displays two pictur e s from different input signals side-by-side.
PICTURE IN PICTURE – Displays two pictur e s from different input signals; one fills the scr e en and
one appears in a window on top of the other pictur e.
To use the Multi-Screen feature:
1. Press the WHO•MULTI button on the r emote to select a mode.
2. If side-by-side mode or pictur e -in-picture mode has been selected, use the left/right arr ow
buttons to position the subscr e en as shown below.
Side-By-Side
VIDEO1 VIDEO2
VIDEO1
VIDEO2
subscreen
3. The active picture (indicated in the above illustrations by the double box) is the pictur e that is
affected be remote actions and menu selections. T o switch the active pictur e, press the OK
button. Press the OK button again to change back to the other pictur e.
Note: Changing the active picture doesn't change the size or location of the pictures.
Chapter 6
Side-by-side 1:
VIDEO1 is the
active picture.
Side-by-side 2:
VIDEO1 is the
active picture.
The Menu System
Picture-in-Picture
VIDEO2
VIDEO1
main screen
subscreen
VIDEO2
main screen
Picture-in-picture
(window on the left):
VIDEO1 is the active
picture.
Picture-in-picture
(window on the right):
VIDEO1 is the active
picture.
VIDEO1
subscreen
23