Setting The Power Saver For Computer Images; The Power/Standby Indicator - RCA Scenium PHD50300 User Manual

FUNCTION
DISPLAY
MENU ADJUST
POWER SAVER
GRAY LEVEL
FILM MODE
RGB3 ADJ.
SCREEN SAVER
RESET
SEL. ADJ.
This is the FUNCTION menu with the POWER
SAVER option highlighted.
POWER/STANDBY indicator
POWER POWER/
SAVER STANDBY
Mode indicator
On Green
Standby Yellow
Suspend Red
Off Red
Chapter 6

Setting the POWER SAVER for Computer Images

: ON
The POWER SA VER function can be used when the signal sour ce to the
: 1
monitor comes from a computer conforming to the VESA DPMS for m at.
: ON
This function automatically reduces the monitor's power consumption if
: 3
no operation is performed for a certain amount of time. POWER SA V ER
: ON
can be turned on or off.
: 1
If the computer's power isn't tur n ed on or if the computer and selector
tuner are not properly connected, POWER SA VER is set to OFF .
For instructions on using the computer's power management function,
RETURN
see your computer's operating manual.
To turn the monitor's POWER SA VER function on or of f :
1. From the main menu, highlight and select FUNCTION. The
2. Highlight the POWER SA VER option.
3. Use the
4. You can continue making adjustments in the FUNCTION menu,
The POWER/STANDBY indicator shows the status of the POWER SA V ER
function. See below for status and description.
Power Saver
Operating Status
Not activated
Activated
Activated
Activated
The Menu System
FUNCTION menu is displayed.
button to toggle the setting ON or OFF .
return to the previous menu by pressing the GO BACK button or
press CLEAR to exit the menu system.
Description
Horizontal and vertical
synchronizing signals are
present from the computer.
No horizontal synchronizing
signals are present from the
computer.
No vertical synchronizing signals
are present from the computer.
No horizontal and vertical
synchronizing signals are present
from the computer.
Turning the Picture Back On
Picture already on.
Use the keyboard or mouse.
The picture reappears immediately.
Use the keyboard or mouse. The
picture reappears, but more slowly
than when in standby mode.
Use the keyboard or mouse. The
picture reappears, but more slowly
than when in either standby or
suspend mode.
33