Adjusting The Display In Rgb3 Input Mode; Setting The Screen Saver; Setting The Ple - RCA Scenium PHD50300 User Manual

FUNCTION
DISPLAY
MENU ADJUST
POWER SAVER
GRAY LEVEL
FILM MODE
RGB3 ADJ.
SCREEN SAVER
RESET
ADJ.
SEL.
This is the FUNCTION menu with the RGB3
ADJ. option highlighted.
FUNCTION
DISPLAY
MENU ADJUST
POWER SAVER
GRAY LEVEL
FILM MODE
RGB3 ADJ.
SCREEN SAVER
RESET
SEL. ADJ.
This is the FUNCTION menu with the SCREEN
SAVER option highlighted.
Setting PLE to LOCK is
recommended if you are displaying
stationary pictures.
Chapter 6
Adjusting the Monitor in RGB3 Input Mode
: ON
If the picture is not stable in RGB3 mode, use the RGB3 ADJUST featur e
: 1
to adjust it.
: OFF
1. From the main menu, highlight and select OPTIONS. The OPTIONS
: 3
: ON
2. Highlight the RGB3 ADJUST option.
: 1
3. Use the
RETURN
4. When the desired number is selected, pr e ss the

Setting the SCREEN SAVER

The SCREEN SA VER option contains three features in one. These featur e s
are used principally for PC operation.
: ON
: 1
The PLE (Peak Luminance Enhancement) function sets the luminance
: OFF
level to a fixed mode to r e duce the effects of phosphor aging.
: 3
The ORBITER (Peak Luminance Enhancement) moves the image ar ound
: ON
the screen intermittently to reduce the effects of phosphor aging.
: 1
The INVERSE function works in RGB mode only. INVERSE inverts the
video signal, playing the image in a negative for mat.
RETURN

Setting the PLE

PLE has two options:
AUTO – luminance level (contrast) is nor m al.
LOCK – dims picture to reduce phosphor aging.
The factory setting is AUTO. Setting the PLE option to LOCK dims the
picture – the contrast will be lower than nor mal.
To set the PLE level to LOCK:
1. From the main menu, highlight and select FUNCTION. The
2. Highlight the PLE option.
3. Use the
4. Press the
The Menu System
menu is displayed.
button to select the desir e d adjustment (1, 2 or 3). The
choices scroll as follows:
the FUNCTION menu items. Y ou can continue making adjustments
within the FUNCTION menu, pr e ss GO BACK to r e turn to the
previous menu or press MENU or CLEAR to exit the menu system.
Note: When AUTO PICTURE is on, switch it off and back on again
to return the display position to its original position.
FUNCTION menu is displayed.
button to select LOCK.
button to return to the FUNCTION menu options. Y ou
can continue making adjustments within the FUNCTION menu,
return to the previous menu or press MENU or CLEAR to exit the
menu system.
button to return to
35