Table of Contents
Advertisement
¢onn ctiQns
Setup
RIGHT
LEFT
EXTERNAL SPEAKERS
DVLHDTV Input
Lets you connect an HDTV Tuner with a DVI output.
DVI (DigitaJ Visual Interface)
Provides an uncompressed,
digital video interface
developed
for high-bandwidth
digital connection.
It supports
the overlay of high-
resolution
graphics needed
by some electronic
program
guide navigation
and other
interactive
services. DVI, when combined
with HDCP (High bandwidth
Digital
Content Protection)
technology,
creates a protected
digital connection.
The DVI-
HDTV connection
is designed
to display either progressive
scan (480p) or HDTV
(1080i) signals at a bandwidth
of up to 1.78 Gigabits per second.
•
L (Audio)
Provides left audio connection
when using the DVI jack. "II_e left audio
connector
is usually white..
•
R (Audio)
Provides
right audio
connection
when
using
the DVI iack. The right
audio
connector
is usually
red.
Note: Remember
to connect the left and right audio cables because the DVI cable
carries only the picture signal, not the sound.
EXTERNAL
SPEAKERS
•
Right and Left Speaker
Terminals
Let you connect external left and right
speakei:s to the "IV to receive left and right sound.
•
EXT/INT
(switch)
Lets you turn the TV's internal
speakers
on or off. EXT sends
audio
to external
speakers
only.
INT sends
audio
to the TV's internal
speakers
only.
Wired IR
This jack is for connecting
a wired remole control system, which is primarily
for professional
installers. If you're using the remote that was included
with your "IV,
don't plug anything into this iack.
The Front of Your TV
Front Input Jacks
"II_e"IV has front inputs t_r convenience:
one set of audio/video
input jacks, an S-Video jack and a headphones
iack. The
iacks are ideal for using a video game console
or a camcorder.
Locate the jacks either on the l¥ont of the TV or on one of
the sides. To access the component
you connected
to the front of the "IV, press the INPUT button on your remote until
FRNTappears
on the screen.
Note: When connecting a component that uses a monaural cable, such as some camcorders, use the Left (mono) input
jack to get sound from both speakers.
PHONES
Allows you to connect headphones
to listen to the sound coming l¥om the "IV. To adjust w_lume control of
the headphones,
press the VOL > or VOL < button (the volume display appeai:s). Press the arrow up or down button (the
headphone
volume display appears),
lhen press the right or left arrow button to adjust the headphone
w_lume.
VIDEO (in)
Receives video from another component
such as a camcorder,
video game console or VCR.
E/MONO and R AUDIO
Receives audio from anolher component
such as a camcordeL
video game console or VCR.
S-VIDEO (in)
Allows you to connect an S-Video cable from another component.
Make sure you also connect audio cables
from the component
to the "IV.
Note: Do not connect an S-Video and a regular video cable to the FRNrjacks at the same time.
14
Graphics contained
within this publication
ara fiar repre.;entation
only.
Chapter 1
Advertisement
Table of Contents
