Genie S-80 Operator's Manual page 4

Operator's Manual
SAFETY RULES
Electrocution Hazards
This machine is not electrically insulated and will
not provide protection from contact with or
proximity to electrical current.
Maintain safe distances from electrical power lines
and apparatus in accordance with applicable
governmental regulations and the following chart.
Voltage
Phase to Phase
0 to 300V
300V to 50KV
50KV to 200KV
200KV to 350KV
350KV to 500KV
500KV to 750KV
750KV to 1000KV
Allow for platform movement, electrical line sway or
sag, and beware of strong or gusty winds.
Keep away from the machine if it contacts
energized power lines. Personnel on the ground or
in the platform must not touch or operate the
machine until energized power lines are shut off.
Do not operate the machine during lightning or
storms.
2
Do not use the machine as a ground for welding
unless the machine is equipped with the weld line
to platform option and it is properly connected.
Tip-over Hazards
Occupants, equipment and materials shall not
exceed the maximum platform capacity.
Maximum platform capacity
S-85
Maximum platform capacity
S-80 with 8 Ft Platform
Maximum platform capacity
S-80 with 6 Ft Platform
Maximum platform capacity
S-80 with foam-filled tires
and proper counterweight
configuration
Minimum Safe
Approach Distance Maximum occupants
Feet Meters
Avoid Contact
The weight of options and accessories, such as
pipe cradles, panel cradles and welders, will reduce
10 3.05
the rated platform capacity and must be factored
15 4.60
into the total platform load. See the decals on the
options.
20 6.10
Do not raise or extend the boom unless both axles
25 7.62
are extended.
35 10.67
45 13.72
Do not raise or extend the boom unless the
machine is on a firm, level surface.
S-80 • S-85
Fifth Edition • Third Printing
500 lbs 227 kg
500 lbs 227 kg
600 lbs 272 kg
750 lbs 340 kg
Part No. 1000231
2