Genie S-80 Operator's Manual page 23

Fifth Edition • Third Printing
Test Machine Functions
34 Press down the foot switch.
35 Activate each machine function control handle
or toggle switch.
Result: All boom/platform functions should
operate through a full cycle.
Test the Steering
36 Press down the foot switch.
37 Press the thumb rocker switch on top of the
drive control handle in the direction indicated by
the blue triangle on the control panel OR slowly
move the drive/steer control handle in the
direction indicated by the blue triangle.
Result: The steer wheels should turn in the
direction that the blue triangles point on the
drive chassis.
38 Press the thumb rocker switch in the direction
indicated by the yellow triangle on the control
panel OR slowly move the drive/steer handle in
the direction indicated by the yellow triangle.
Result: The steer wheels should turn in the
direction that the yellow triangles point on the
drive chassis.
Part No. 1000231
Test Drive and Braking
39 Press down the foot switch.
40 Slowly move the drive control handle in the
direction indicated by the blue arrow on the
control panel until the machine begins to move,
then return the handle to the center position.
Result: The machine should move in the
direction that the blue arrow points on the drive
chassis, then come to an abrupt stop.
41 Slowly move the drive control handle in the
direction indicated by the yellow arrow on the
control panel until the machine begins to move,
then return the handle to the center position.
Result: The machine should move in the
direction that the yellow arrow points on the
drive chassis, then come to an abrupt stop.
Note: The brakes must be able to hold the machine
on any slope it is able to climb.
S-80 • S-85
Operator's Manual
FUNCTION TESTS
21