Genie S-80 Operator's Manual page 32

Operator's Manual
OPERATING INSTRUCTIONS
Generator (if equipped)
To start the generator, move the generator toggle
switch to the on position.
Plug a power tool into the power to platform GFCI
outlet.
To turn off the generator, move the generator toggle
switch to the off position.
Note: Machine functions will not operate while the
generator is running and the foot switch is not
pressed down. When the foot switch is pressed
down, the generator will turn off and the machine
functions will operate.
Fall Protection
Personal fall protection equipment (PFPE) is
required when operating this machine.
All PFPE must comply with applicable
governmental regulations, and must be inspected
and used in accordance with the PFPE
manufacturer's instructions.
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Retract and lower the boom to the stowed
position.
3 Rotate the turntable so that the boom is between
the non-steer wheels.
4 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
5 Chock the wheels.
30 S-80 • S-85
Fifth Edition • Third Printing
Part No. 1000231