Mimic Screen; Display Menu Operation - Eaton 93E Installation And Operation Manual

7.2.5
Figure 40 shows the main menu and the Mimic screen. To select the
Mimic screen from the Meters, Events, History, Controls, or Setup
screens, press the ESC push button on the current menu bar.
The Mimic screen shows the internal components of the UPS cabinet
and a real-time graphical representation of the operating status of the
system.
Figure 40. Main menu and the Mimic screen
7.2.6
Table 15 describes the menu functions and how to use them.
Table 15. Display menu operation
Function
Meters –
UPS
© Eaton Corporation plc 2015. All rights reserved.
Eaton 93E UPS 15-80 kVA (380/400/415 V)

Mimic screen

Display menu operation

Sub-function Operation
The Meters screens show the UPS meter
readings for the unit. The default voltage
displayed on these screens is phase-to-
neutral. These can be changed to display the
voltage phase-to-phase (A-B, B-C, C-A). Use
the or push buttons to select the
METERS symbol on the main menu bar to
display the Meter screens. To scroll through
the Meter screens, press the
pushbutton. The current UPS readings are
displayed in the information area of the
screen.
Revision: 001
Document ID: 614-01975-00
Installation and Operation Manual
or
91 (133)