Figure 42. Main Menu And Mimic Screen - Eaton 93E Series Installation And Operation Manual

UPS Operating Instructions

Figure 42. Main Menu and Mimic Screen

7 7 . . 2 2 . . 6 6 D D i i s s p p l l a a y y M M e e n n u u O O p p e e r r a a t t i i o o n n
Table 18 describes the menu functions and how to use them.
Table 18. Display Menu Operation
Function
Meters – UPS
Events
72 Eaton 93E UPS (40–60 kVA, 208/220V) Installation and Operation Manual P-164000302—Rev 04
Eaton 93E Series UPS
Operation
Subfunction
The Meter screens show the UPS meter readings for the unit. The default voltage
displayed on these screens is phase-to-neutral. These can be changed to display
the voltage phase-to-phase (A-B, B-C, C-A). Use the LEFT or RIGHT arrow
pushbuttons to select the METER symbol on the main menu bar, to display the
Meter screens. To scroll through the meter screens, press the UP or DOWN
arrow pushbutton. The current UPS readings are displayed in the information
area of the screen.
Output – UPS The Output screen shows output voltage (phase to neutral), output current (each
phase), and frequency being supplied by the UPS, as well as the kVA, kW, and
power factor measurements.
Input – UPS The Input screen shows input voltage (phase to neutral), input current (each
phase), and frequency of the incoming utility source, as well as the kVA, kW, and
power factor measurements.
Bypass The Bypass screen shows the bypass input voltage (phase to neutral), input
current (each phase), and frequency of the incoming utility source, as well as the
kVA, kW, and power factor measurements.
Battery – UPS The Battery screen displays the battery voltage (Vdc) and the battery current
(Idc).
Use the LEFT or RIGHT arrow pushbuttons to select the EVENTS symbol on the
main menu bar to display the Events screens. A listing of all system events that
are currently active is displayed. The most recent event is listed first. As events
clear, they are removed from the Events listing. To scroll through the events,
press the UP or DOWN arrow pushbutton.