Configuring Idrac7 Sso Login For Active Directory Users Using Web Interface; Configuring Idrac7 Sso Login For Active Directory Users Using Racadm; Configuring Idrac7 Smart Card Login For Local Users; Uploading Smart Card User Certificate - Dell iDRAC7 User Manual

Configuring Active Directory With Extended Schema Using iDRAC7 Web Interface
Configuring Active Directory With Extended Schema Using RACADM

Configuring iDRAC7 SSO Login for Active Directory Users Using Web Interface

To configure iDRAC7 for Active Directory SSO login:
NOTE: For information about the options, see the
1. Verify whether the iDRAC7 DNS name matches the iDRAC7 Fully Qualified Domain Name. To do this, in iDRAC7 Web
interface, go to Overview → iDRAC Settings → Network → Network and see the DNS Domain Name property.
2. While configuring Active Directory to setup a user account based on standard schema or extended schema,
perform the following two additional steps to configure SSO:
– Upload the keytab file on the Active Directory Configuration and Management Step 1 of 4 page.
– Select Enable Single Sign-On option on the Active Directory Configuration and Management Step 2 of 4 page.

Configuring iDRAC7 SSO Login for Active Directory Users Using RACADM

In addition to the steps performed while configuring Active Directory, to enable SSO, run any of the following command:
• Using config command:
racadm config -g cfgActiveDirectory -o cfgADSSOEnable 1
• Using set command:
racadm set iDRAC.ActiveDirectory.SSOEnable 1

Configuring iDRAC7 Smart Card Login for Local Users

To configure iDRAC7 local user for smart card login:
1. Upload the smart card user certificate and trusted CA certificate to iDRAC7.
2. Enable smart card login.
Related Links
Obtaining Certificates

Uploading Smart Card User Certificate

Enabling or Disabling Smart Card Login
Uploading Smart Card User Certificate
Before you upload the user certificate, make sure that the user certificate from the smart card vendor is exported in
Base64 format. SHA-2 certificates are also supported.
Related Links
Obtaining Certificates
Uploading Smart Card User Certificate Using Web Interface
To upload smart card user certificate:
1. In iDRAC7 Web interface, go to Overview → iDRAC Settings → Network → User Authentication → Local Users.
The Users page is displayed.
2. In the User ID column, click a user ID number.
The Users Main Menu page is displayed.
148
iDRAC7 Online Help .