Table of Contents
Advertisement
•
Soft restart — Using iDRAC7 Web interface or RACADM.
Resetting iDRAC7 Using iDRAC7 Web Interface
To restart iDRAC7, do one of the following in the iDRAC7 Web interface:
•
Go to Overview → Server → Summary. Under Quick Launch Tasks, click Reset iDRAC.
•
Go to Overview → Server → Troubleshooting → Diagnostics. Click Reset iDRAC.
Resetting iDRAC7 Using RACADM
To restart iDRAC7, use the racreset command. For more information, see the
CMC available at dell.com/support/manuals.
Resetting iDRAC7 to Factory Default Settings
You can reset iDRAC7 to the factory default settings using the iDRAC Settings utility or the iDRAC7 Web interface.
Resetting iDRAC7 to Factory Default Settings Using iDRAC7 Web Interface
To reset iDRAC7 to factory default settings using the iDRAC7 Web interface:
1.
Go to Overview → Server → Troubleshooting → Diagnostics.
The Diagnostics Console page is displayed.
2.
Click Reset iDRAC to Default Settings.
The completion status is displayed in percentage. iDRAC7 reboots and is restored to factory defaults. The iDRAC7
IP is reset and is not accessible. You can configure the IP using the front panel or BIOS.
Resetting iDRAC7 to Factory Default Settings Using iDRAC Settings Utility
To reset iDRAC7 to factory default values using the iDRAC Settings utility:
1.
Go to Reset iDRAC configurations to defaults.
The iDRAC Settings Reset iDRAC configurations to defaults page is displayed.
2.
Click Yes.
iDRAC reset starts.
3.
Click Back and navigate to the same Reset iDRAC configurations to defaults page to view the success message.
RACADM Reference Guide for iDRAC7 and
233
Advertisement
Table of Contents
Troubleshooting
