Filtering Alerts Using Racadm; Setting Event Alerts; Setting Event Alerts Using Web Interface; Setting Event Alerts Using Racadm - Dell iDRAC7 User Manual

4. Click Apply.
The Alert Results section displays the results based on the selected category and severity.

Filtering Alerts Using RACADM

To filter the alerts, use the eventfilters command. For more information, see the
Guide for iDRAC7 and CMC available at dell.com/support/manuals.

Setting Event Alerts

You can set event alerts such as e-mail alerts, IPMI alerts, SNMP traps, remote system logs, operating system logs, and
WS events to be sent to configured destinations.
Related Links
Enabling or Disabling Alerts
Configuring Email Alert, SNMP Trap, or IPMI Trap Settings
Filtering Alerts
Configuring Remote System Logging
Configuring WS Eventing

Setting Event Alerts Using Web Interface

To set an event alert using the Web interface:
1. Make sure that you have configured the e-mail alert, IPMI alert, SNMP trap settings, and/or remote system log
settings.
2. Go to Overview → Server → Alerts.
The Alerts page is displayed.
3. Under Alerts Results, select one or all of the following alerts for the required events:
– Email Alert
– SNMP Trap
– IPMI Alert
– Remote System Log
– OS Log
– WS Eventing
4. Click Apply.
The setting is saved.
5. Under Alerts section, select the Enable option to send alerts to configured destinations.
6. Optionally, you can send a test event. In the Message ID to Test Event field, enter the message ID to test if the alert
is generated and click Test. For the list of message IDs, see the
support/manuals.

Setting Event Alerts Using RACADM

To set an event alert, use the eventfilters command. For more information, see the
Guide for iDRAC7 and CMC available at dell.com/support/manuals.
RACADM Command Line Reference
Event Messages Guide available at dell.com/
RACADM Command Line Reference
153