Managing Logs; Viewing System Event Log; Viewing System Event Log Using Web Interface; Viewing System Event Log Using Racadm - Dell iDRAC7 User Manual

Table of Contents

Advertisement

Managing Logs

iDRAC7 provides Lifecycle log that contains events related to system, storage devices, network devices, firmware
updates, configuration changes, license messages, and so on. However, the system events are also available as a
separate log called System Event Log (SEL). The lifecycle log is accessible through iDRAC7 Web interface, RACADM,
and WS-MAN interface.
When the size of the lifecycle log reaches 800 KB, the logs are compressed and archived. You can only view the non-
archived log entries, and apply filters and comments to non-archived logs. To view the archived logs, you must export
the entire lifecycle log to a location on your system.
Related Links

Viewing System Event Log

Viewing Lifecycle Log
Adding Work Notes
Configuring Remote System Logging
Viewing System Event Log
When a system event occurs on a managed system, it is recorded in the System Event Log (SEL). The same SEL entry is
also available in the LC log.

Viewing System Event Log Using Web Interface

To view the SEL, in iDRAC7 Web interface, go to Overview → Server → Logs.
The System Event Log page displays a system health indicator, a time stamp, and a description for each event logged.
For more information, see the
Click Save As to save the SEL to a location of your choice.
NOTE: If you are using Internet Explorer and if there is a problem when saving, download the Cumulative Security
Update for Internet Explorer. You can download it from the Microsoft Support website at support.microsoft.com.
To clear the logs, click Clear Log.
NOTE: Clear Log only appears if you have Clear Logs permission.
After the SEL is cleared, an entry is logged in the Lifecycle Controller log. The log entry includes the user name and the
IP address from where the SEL was cleared.

Viewing System Event Log Using RACADM

To view the SEL:
racadm getsel <options>
If no arguments are specified, the entire log is displayed.
To display the number of SEL entries: racadm getsel -i
To clear the SEL entries: racadm clrsel
iDRAC7 Online Help .
10
161

Advertisement

Table of Contents
loading

Table of Contents