Idrac7 Port Information - Dell iDRAC7 User Manual

Interface or Protocol Description
provided by iDRAC7 instrumentation interface mapped to the DMTF profiles and extension
profiles.
For more information, see the following:
•
•
•
•
•
•

iDRAC7 Port Information

The following ports are required to remotely access iDRAC7 through firewalls. These are the default ports iDRAC7
listens to for connections. Optionally, you can modify most of the ports. To do this, see
Table 4. Ports iDRAC7 Listens for Connections
Port Number
22*
23*
80*
443*
623
161*
5900*
5901
* Configurable port
The following table lists the ports that iDRAC7 uses as a client.
Table 5. Ports iDRAC7 Uses as Client
Port Number
25*
53
68
69
162*
445
Lifecycle Controller-Remote Services User's Guide available at dell.com/support/manuals.
Lifecycle Controller Integration Best Practices Guide available at dell.com/support/
manuals.
Lifecycle Controller page on Dell TechCenter — delltechcenter.com/page/Lifecycle
+Controller
Lifecycle Controller WS-Management Script Center — delltechcenter.com/page/Scripting
+the+Dell+Lifecycle+Controller
MOFs and Profiles — delltechcenter.com/page/DCIM.Library
DTMF Web site — dmtf.org/standards/profiles/
Function
SSH
Telnet
HTTP
HTTPS
RMCP/RMCP+
SNMP
Virtual Console keyboard and mouse redirection, Virtual Media, Virtual Folders, and
Remote File Share
VNC
When VNC feature is enabled, the port 5901 opens.
Function
SMTP
DNS
DHCP-assigned IP address
TFTP
SNMP trap
Common Internet File System (CIFS)
Configuring Services.
25