Table of Contents
Advertisement
You can also configure iDRAC to generate additional events. For more information, see the
Event
section.
Viewing Historical Temperature Data Using iDRAC7 Web Interface
To view historical temperature data:
1.
In the iDRAC7 Web interface, go to Overview → Server → Power / Thermal → Temperatures.
The Temperatures page is displayed.
2.
See the System Board Inlet Temperature Historical Data section that provides a graphical display of the stored inlet
temperature (average and peak values) for the last day, last 30 days, and last year.
For more information, see the
NOTE: After an iDRAC firmware update or iDRAC reset, some temperature data may not be displayed in the
graph.
Viewing Historical Temperature Data Using RACADM
To view historical data using RACADM, use the inlettemphistory subcommand. For more information, see the
Command Line Reference Guide for iDRAC7 and CMC .
Inventory and Monitoring Storage Devices
You can remotely monitor the health and view the inventory of the following Comprehensive Embedded Management
(CEM) enabled storage devices in the managed system using iDRAC7 Web interface or RACADM:
•
RAID controllers that include battery.
•
Enclosures that includes Enclosure Management Modules (EMMs), power supply, fan probe, and temperature probe
•
Physical disks
•
Virtual disks
However, WS-MAN displays information for most of the storage devices in the system.
iDRAC7 inventories and monitors the PERC 8 series of RAID controllers that include H310, H710, H710P, and H810. The
controllers that do not support Comprehensive Embedded Management are Internal Tape Adapters (ITAs) and SAS
6Gbps HBA.
The recent storage events and topology of storage devices are also displayed.
Alerts and SNMP traps are generated for storage events. The events are logged in the Lifecycle Log.
For the conceptual information, see
manuals.
Monitoring Storage Device Using Web Interface
To view the storage device information using Web interface:
•
Go to Overview → Storage → Summary to view the summary of the storage components and the recently logged
events. This page is automatically refreshed every 30 seconds.
•
Go to Overview → Storage → Topology to view the hierarchical physical containment view of the key storage
components.
•
Go to Overview → Storage → Physical Disks to view physical disk information. The Physical Disks page is
displayed.
iDRAC7 Online Help .
OpenManage Storage Management User's Guide available at dell.com/support/
Setting Alert Recurrence
RACADM
97
Advertisement
Table of Contents
Troubleshooting
