jbc HDE-1UB Manual page 8

Working with Robots
Manage and monitor the station using a Robotic system.
1. Connect the tool to the station port by means of the CHB-A converter.
2. Connect your Robot system to the Robot connector (RJ12) of the station.
DB9-RJ12 Adapater available only if necessary (Ref. 0013772).
3. Enable the Robot option in the station settings and the notification will be displayed:
4. Set your Robot's commands according to the Robot Communication Protocol, available on the
website www.jbctools.com/jbcsoftware-menu-115.html
Robot
Update the station software
1. Download the JBC Update file from
www.jbctools.com/software.html and save
it on a USB flash drive. Preferably one with no
other files.
8
RS-232
connection
JBC
Update file
Converter
Ref. CHB-A
2. Insert the USB flash drive.
The icon is diplayed while updating.
HDE
Control Unit