Table of Contents
Advertisement
Access Modular
Controller
Using the AMC2-4W gives you the full functionality and the
offline capability of a complete access control system in each
room. This leads to an excellent reliability and a very high
redundancy without extra cost.
Figure 3.2: The AMC2-4W in a four door safety lock
The AMC2-4W can communicate upstream to the host computer
using RS-485 multi‑dropped, RS-232 or 10/100 Mbit/s Ethernet.
It has eight analog input devices and eight relay outputs. With
its analog input devices, the AMC2-4W verifies, for example, if a
lock is closed or open. The relay outputs can be used to activate
lock mechanisms if access is granted, or activate the burglar
alarm system if an intrusion or system alert is detected. If the
eight inputs and eight outputs on board are not enough to
configure the system, up to three additional extensions
(AMC2-8IOE, AMC2-16IE, or AMC2-16IOE) can be connected.
The extensions offer 8 or 16 additional inputs and outputs.
The setup procedure for an AMC2-4W is made very simple and
fast by the use of door templates. Once selected, all the inputs
and outputs are predefined. These settings can be changed to
choose every free contact of the controller or a connected
extension.
Bosch Sicherheitssysteme
Introduction | en
2016-11 | AMC2-4W |
13
Hide quick links:
Advertisement
Table of Contents
