Technical Data - Bosch AMC2-4W Installation Manual

Access Modular
Controller
6

Technical Data

Hardware
–
–
–
–
–
–
–
–
–
–
–
–
–
Bosch Sicherheitssysteme
Integrated Microcontroller (32 bit, 30 MHz)
SRAM (256 kB)
Serial EEPROM
RTC (real time clock)
Pluggable Compact Flash card
Battery for SRAM and RTC
DIL switch for host settings (address and protocol mode)
Host interfaces
– Ethernet 10/100 Mbit/s
– RS-485 2-wire or 4-wire
Transfer rate: 38,4 kBit/s,
even parity, 7 bit, 1 stop bit,
– RS-232
Transfer rate: 38,4 kBit/s
no parity, 8 bit, 1 stop bit
Four Wiegand interfaces for up to four card readers
(Output rating: 280 mA each @ 12Vdc)
Eight relay outputs
– maximum ratings (wet and dry):
switching voltage: 30 Vdc
switching current: 1,25 A
– operating ratings (wet and dry):
1,25 A @ 30 Vdc
2 A @ 12 Vdc
1,5 A @ 24 Vdc
Eight analog inputs with tamper detection; only connect dry
contacts
RS-485 extension interface:
Transfer rate: 9,6 kBit/s,
no parity, 8 bit, 2 stop bit
Tamper contact for external enclosures
Technical Data | en
2016-11 | AMC2-4W |
55