Vial Labels - Agilent Technologies 7697A Operation Manual

5
Sample Vials

Vial Labels

C A U T I O N
23.5 mm
maximum,
including label
C A U T I O N
40
Make sure that any label and ink can withstand the oven heat
without degrading.
If using labels with a 111 vial model, the label needs to
conform to the dimensions below. If also using the optional
barcode reader, the barcode labels must conform to the
general dimensions for labels, plus the placement
requirements shown.
1 mm skew
maximum
4.0 mm high
minimum
Figure 7 Vial label and barcode specifications
Correct sample vial dimensions are critical for proper gripper
operation. Vials and labels that do not meet these specifications
may cause sampler errors. Service calls and repairs found to be due
to vials and labels that do not meet these specifications are not
covered under warranty or the service contract.
No label
17.5 mm
minimum
Text
Bar code
Text
19 mm
maximum
17.0 mm
minimum
Operation