To Create A Sequence - Agilent Technologies 7697A Operation Manual

To Create a Sequence

Operation
To create a new sequence:
1 Press [Seq].
2 Select the method for the first vial range.
a Press [Mode/Type].
b Scroll to the desired method.
c Pres [Enter] to select this method.
3 Enter the range of vial to prepare with this method.
• For a simple range, for example vials 1 through 5,
press [1][–][5][Enter].
• For a single vial, enter the vial twice, for example,
[6][–][6][Enter].
Enter the number of injections per vial, then press [Enter].
4
The sequence is created. You can now store the sequence
(see "To Save (Store) a
Series (Sequence) of
additional lines as described below.
To enter another range of vials, press [Insert/Append].
5
When prompted, select where to add the new sequence
line then press [Enter]:
• Append to sequence: add the new line to the end of the
sequence
Insert into sequence: add the new line before the current
•
sequence line
Enter the method, vial range, and number of injections
6
per vial for the new line.
7 Repeat step 5 and
You can now store the sequence (see
Sequence") or run it (see
Samples").
Sequence"), run it (see
Samples"), or continue to add
step 6 as needed.
"To Save (Store) a
"To Run a Series (Sequence) of
7
Sequences
"To Run a
69