The Status Key - Agilent Technologies 7697A Operation Manual

The Status Key

Operation
Use the Status key to learn about the current HS state.
Status key
Status Toggles between sequence, setpoint, and vial status
information and messages. Also displays "ready,"
"not ready," and "fault" information.
When the Not Ready status light is blinking, a fault
has occurred.
The order in which items appear in the scrolling
display window for setpoint status can be modified.
You may, for example, want to display the things you
most frequently check in the top three lines so that
you do not need to scroll to see them. To change the
order of the Status display:
1 Press [Config] [Status].
2 Scroll to the setpoint you want to appear first and
3 Scroll to the setpoint you want to appear second
4 Continue as above until the list is in the order you
press [Enter]. This setpoint will now appear at the
top of the list.
and press [Enter]. This setpoint will now be the
second item on the list.
require.
3
The Keypad
23