The Run Keys - Agilent Technologies 7697A Operation Manual

The Run Keys

Operation
Use these keys to start sample preparation, stop preparation,
and move the sample tray prior to loading sample vials.
Run keys
Stop During a sequence:
•
•
Start Begin processing the next sample or sequence of
samples. When processing is complete for a sample,
the HS performs an injection to the GC and sends a
Start Run signal.
•
Tray Park/Carousel
Advance
•
Priority Sample 111 vial tray model only. Standalone use only.
Press to insert a sample vial into the running
sequence. Disabled when using data system control.
Press once to pause the sequence. Current
samples continue processing, but no new samples
will be started. Press [Start] to resume.
Press twice (within 5 seconds) to abort the
sequence. Any vials in the vial oven will be
returned to the tray.
For the 111 vial model, press to park or unpark the
tray. (Park the tray to load/unload vials or vial
racks.) If pressed during a running sequence, the
sequence pauses until the tray is unparked.
For the 12 vial model, press to advance the
carousel one position.
3
The Keypad
19