ABB REL650 Product Manual page 44

Line distance protection REL650 ANSI
Product version: 1.3
Table 19. Insulation tests
Description
Dielectric tests:
• Test voltage
Impulse voltage test:
• Test voltage
Insulation resistance measurements
• Isolation resistance
Protective bonding resistance
• Resistance
Table 20. Mechanical tests
Description
Vibration response tests (sinusoidal)
Vibration endurance test
Shock response test
Shock withstand test
Bump test
Seismic test
Product safety
Table 21. Product safety
Description
LV directive
Standard
EMC compliance
Table 22. EMC compliance
Description
EMC directive
Standard
44
Type test value
2 kV, 50 Hz, 1 min
1 kV, 50 Hz, 1 min, communication
5 kV, unipolar impulses, waveform 1.2/50 μs,
source energy 0.5 J
1 kV, unipolar impulses, waveform 1.2/50 μs,
source energy 0.5 J, communication
>100 MΏ, 500 V DC
<0.1 Ώ (60 s)
Reference
IEC 60255-21-1
IEC60255-21-1
IEC 60255-21-2
IEC 60255-21-2
IEC 60255-21-2
IEC 60255-21-3
Reference
2006/95/EC
EN 60255-27 (2005)
Reference
2004/108/EC
EN 50263 (2000)
EN 60255-26 (2007)
1MRK 506 337-BUS B
Reference
IEC 60255-5
ANSI C37.90-2005
IEC 60255-5
ANSI C37.90-2005
IEC 60255-5
ANSI C37.90-2005
IEC 60255-27
Requirement
Class 1
Class 1
Class 1
Class 1
Class 1
Class 2
ABB