Appendix; Performance Data And Specifications - Lancom OAP-54 Manual

LANCOM OAP-54 Wireless and LANCOM OAP-310agn Wireless
Chapter 9: Appendix

9 Appendix

9.1

Performance data and specifications

Frequency band
Connections LAN
WAN
WLAN1
WLAN2
Power supply
Antennas
Adapter cables
Housing
Approvals
Regulations
Environment/Tem-
perature
Service
Support
92
LANCOM OAP-54 Wireless
Two WLAN modules with 2400 -
2483,5 MHz (ISM) or 5150 - 5750 MHz
each
10/100Base-TX, Autosensing, Auto Node-Hub
10/100Base-TX, Autosensing, Auto Node-Hub
2x reverse N socket with antenna
diversity
1x reverse N socket
Via Power over Ethernet only. One PoE Injector supplied.
Two dualband dipole antennas sup-
plied.
Please respect the restrictions given in your country when setting up an antenna
system. For information about calculating the correct antenna setup, please refer
to www.lancom.eu
Reverse N-to-N adapter cables supplied to connect all AirLancer Extender outdoor
antennas or antennas from other manufacturers.
235 mm x 210 mm x 80 mm (W x H x D), 3.4kg, robust metal housing, IP66 water-
jet resistant, ready for wall and pole mounting, 6 LEDs for status display
CE compliant according to ETSI EN 300 328, ETSI EN 301 893, ETSI EN 301 489-1,
ETSI EN 301 489-17, EN 60950
Notified in Germany, Belgium, Netherlands, Luxemburg, Austria, Switzerland,
United Kingdom, Italy, France, Czechia, Denmark
The courrent list of notifications can be found at www.lancom.eu
Temperature range –30 °C bis +70 °C
at 95 % max. humidity (non condens-
ing)
Warranty: 3 years
Via hotline and Internet
LANCOM OAP-310agn Wireless
WLAN module with 2400 - 2483,5
MHz (ISM) or 5150 - 5750 MHz
3x reverse N socket
Three dualband dipole antennas sup-
plied.
Temperature range –30 °C bis +65 °C
at 95 % max. humidity (non condens-
ing)