Lancom OAP-54 Manual page 80

LANCOM OAP-54 Wireless and LANCOM OAP-310agn Wireless
To enter the key, change to the '802.11i/WEP' tab under LANconfig in the
'Wireless LAN' configuration area. From 'WPA / private WEP settings',
select the first WLAN interface from the list of logical WLAN settings.
Enable encryption and match the encryption method to the settings for
the access point.
In WLAN client operating mode, the LANCOM Access Points and LANCOM
Wireless Routers can authenticate themselves to another access point
using EAP/802.1X. For this, select the desired client EAP method here.
Note that the selected client EAP method must match the settings of the
access point that the device is attempting to log onto.
Depending on the EAP method, the appropriate certificates must be

stored in the device.
For TTLS and PEAP - the EAP/TLS root certificate only; the key is ente-
red as a combination username:password.
For TLS in addition; the EAP/TLS device certificate including the private
key.
Chapter 5: Advanced wireless LAN configuration
79