Table of Contents
Advertisement
LANCOM OAP-54 Wireless and LANCOM OAP-310agn Wireless
Chapter 2: Installation
The following can be displayed for WLAN link:
Off
Yellow
Yellow
Yellow
WLAN Data
Provides information about the data traffic at the internal WLAN module.
(LANCOM
The following can be displayed for WLAN data:
OAP-310agn
Wireless only)
Yellow
Connection status of the WAN interface. The WAN link display can assume
WAN
three states:
off
green
green
26
No WLAN network defined or WLAN module deactiva-
ted. The WLAN module is not transmitting beacons.
At least one WLAN network is defined and WLAN
module activated. The WLAN module is transmitting
beacons.
Inverse flashing
Number of flashes = number of connected WLAN stati-
ons and P2P wireless connections, followed by a pause
(default).
Alternatively, the frequency of the flashed can indicate
the received signal strength of a P2P link or the received
signal strength from an access point, to which this
device is connected in client mode.
Blinking
DFS scanning or other scan procedure.
Flickering
TX data traffic.
Not connected
constantly on
Connection established
inverse flashing
Data transfer via WAN
Advertisement
Table of Contents
