Client Settings - Lancom OAP-54 Manual

whereupon they act as conventional wireless LAN adapters and not as access
points (AP). The use of client mode therefore allows devices fitted with only
an Ethernet interface, such as PCs and printers, to be integrated into a wire-
less LAN.
SERVER
LAN
ACCESS POINT
WLAN device
in AP mode
Multiple WLAN clients can register with a WLAN device in AP mode,

which is not the case for a WLAN device in client mode.
5.4.1

Client settings

For LANCOM Access Points and LANCOM Wireless Routers in client mode,
further settings/client behavior can be configured from the 'Client mode' tab
under the settings for the physical interfaces.
The configuration of the client settings can also be carried out with

the WLAN Wizards in LANconfig.
LANCOM OAP-54 Wireless and LANCOM OAP-310agn Wireless
Chapter 5: Advanced wireless LAN configuration
WLAN device
in client mode
PRINTER
ACCESS POINT
WLAN device
in client mode
PC
ACCESS POINT
LAPTOP/W-LAN
77