Table of Contents
Advertisement
2-2 General Functions
2-2-1 Making a Call
1. Open the flip cover, and press
Note: If you turn the Active Flip feature on, you do not need to press the
2. Dial the desired phone number by using the number keypad.
Note: You can store telephone numbers in Phonebook memory and dial the numbers using the assigned
memory address. Refer to ÔPhonebookÕ on page 32.
3. When the other person answers, speak.
4. To end the call, either close the flip cover or press
Notes:
¥ If you turn the ÔCall Time DisplayÕ feature on, the LCD
window displays the call time. For details, see ÔCall Time DisplayÕ on page 49.
¥ To make a call to the last number you dialled, use the ÔRedial Ô feature. For details, refer to ÔLast Number
RedialÕ on page 23.
You can enter the desired phone number in the Standby mode, and then dial the number. This way of dialling
allows you to make corrections to the number before dialling. Follow these steps:
1. Enter a telephone number. Check the number in the LCD window.
Notes:
¥ If you make a mistake while entering a number, press the
number.
¥ If you press and hold the
second, all digits you have entered are cleared and the phone returns to the Standby mode.
2. When the number appears correctly, press
Operations & Installation
key. You hear a dial tone.
C
key for more than one
key to dial the number.
key.
C
key to clear the last digit and correct the
key. For details, see page 50.
2-10
Advertisement
Table of Contents
