Table of Contents
Advertisement
2-1-6 Turning the Handset On/Off
When you place the handset in the base unit to charge it, the handset automatically turns on. To turn the
handset on or off in Standby mode, follow these steps:
1. To turn on the handset when the display is off, press
The display shows the handset and base number, and the greeting message SAMSUNG as shown below.
(To change the greeting, see page 42) The phone is now ready for use.
2. To turn the handset off, press and hold
appears in the display. The display turns off.
Notes:
¥ If you purchase an additional handset, you must register the handset to a base. If not, the display shows Fail
to Register when you turn it on and only two soft keys work to allow you to register the handset. Refer to
ÔRegistering a New HandsetÕ on page 54.
¥ Nothing will appear in the LCD window when battery power is very low. You should fully charge the
handset before operation.
2-1-7 LCD Window Icon Descriptions
H S ( 1 )
S A M S U N G
Signal Strength icon
Line icon
Operations & Installation
H S ( 1 )
S A M S U N G
key for about three seconds until the power-off message
INT
B S ( 1 )
key.
INT
B S ( 1 )
Vibration icon
Battery status icon
2-8
Advertisement
Table of Contents
