General Functions; Making A Call; Camp On Busy - Samsung SP-R7000 User Manual

General Functions

Making a Call

1. Open the flip cover, and press the
2. Dial the desired phone number by using the number keypad.
Note: While entering a phone number, the
pause. The number after a pause will be automatically sent 4 seconds
after the first number is dialled. A pause is useful when you access an
interactive voice response system, such as an automated banking
system.
3. When the other person answers, speak.
4. To end the call, either close the flip cover or press the
Notes:
• If you turn the 'Call Time' feature on, the LCD window displays the call
time. For details, see 'Call Time' on page 41.
• To make a call to the last number you dialled, use the 'Redial' feature.
For details, refer to 'Last Number Redial' on page 16.
• You can store telephone numbers in Phonebook memory and dial the
numbers using the assigned memory address. Refer to 'Phonebook' on
page 29.
You can enter the desired phone number in the Standby mode, which
allows you to make corrections before dialling. Follow these steps:
1. Enter a telephone number. Check the number on the LCD window.
Note: If you make a mistake while entering a number, press the
button to clear the last digit and correct the number. If you press and
hold the button for more than one second, all digits you have
entered are cleared and the handset returns to the Standby mode.
2. When the number appears correctly, press the
number.
14
button. You hear a dial tone.
button enters 'P', a hard
button.
button to dial the

Camp On Busy

(Available only when you have more than one handset)
This feature allows your handset to wait for connection to the telephone
line currently engaged by another handset. Your handset rings when the
telephone line becomes free.
1. You will hear a short busy tone if you press the
another handset engages the telephone line.
Result : The display shows the handset number currently engaging the
line and your handset is automatically camped on the line.
Note: To cancel this feature, press the
free. The handset returns to the Standby mode.
2. When the line becomes free, your handset rings and the window
displays Free.
3. Press the button to engage the line while the handset rings.
Notes:
• If an incoming call arrives while your handset rings to tell you the line
is free, the 'Camp On Busy' feature is automatically cancelled and an
incoming ring sounds.
• Several handsets can be camped on the busy line in chronological
order. When the line becomes available to you, the LCD window
displays Free, and other handsets will display your handset number
following the word Busy.
• When your handset rings and the window displays Free, press the
button within 10 seconds. Otherwise, the handset returns to the
Standby mode.
G F
E N E R A L U N C T I O N S
button while
button any time before the line is
15