Table of Contents
Advertisement
2-9-3 Intercom Between Handsets
(Available only when you have more than one handset)
If you have multiple handsets registered with the base, two handsets can talk to each other on an internal
intercom call, while a third handset can be on an external call.
1. Press
key on your handset. INTERCOM -> displays and the cursor blinks.
INT
2. Enter the number of the handset (1-6) you want to page.
3. The paged handset rings. The LCD window on the paged handset displays your handset number.
Notes:
¥ If you enter a handset number that does not exist, the handset shows IT IS NOT REGISTERED and
sounds an error tone.
¥ To cancel intercom, close the flip or press either
¥ You cannot adjust the intercom ringer volume.
4. To answer the call from you, the paged handset should open the flip or press either
5. When the paged handset answers you, speak.
6. To end the call, close the flip or press either
Notes:
¥ If an external call comes in during an intercom conversation, you will hear beeps. When you hear the low
beeps, finish the intercom call by pressing
answer the call.
¥ When you make an intercom call, if Busy appears in the display and you cannot communicate with the
paged handset, the paged handset is engaged with an outside party. Your handset is automatically camped
on to the busy station, and when the busy station becomes free, both handsets will ring.
¥ When you make an intercom call, if INTERCOM IS USED is shown in your display, the handset you tried
to connect with is engaged with another internal line.
¥ In step 3, if the paged person opens the flip cover to answer the call from you, that person does not need to
press
or
key.
INT
Operations & Installation
key or
INT
or
key.
INT
or
key. The external ring sounds. Press
INT
key.
or
INT
key.
key to
2-36
Advertisement
Table of Contents
