Table of Contents
Advertisement
2-9-6 Changing PIN (Personal Identification Number)
The PIN is required when you access System menus. The PIN is preset to Ô0000Õ at factory. You can change the
PIN code.
1. In the Standby mode, press the Menu soft key.
2. Press the
soft key repeatedly until System appears, then press the Select soft key.
3. Enter the PIN code, then press the OK soft key.
4. Press the
soft key repeatedly until Change PIN appears, then press the Select soft key.
5. New PIN [ ] is displayed. Enter a new PIN code, then press the OK soft key. The LCD window does not
display the PIN code you entered in order to maintain secrecy.
Note: It must be 4 digits. If you make a mistake, you can correct the number by using the
6. Enter the new PIN code again to confirm the number, then press the OK soft key.
Notes:
¥ If you enter a different number from the new code, the phone sounds an error beep, and returns to the
previous screen.
¥ If you change the PIN code and then forget it, you will have to contact your local service center.
¥ If you want to exit from the Change PIN mode while changing PIN, press the Exit soft key.
Operations & Installation
C
key.
2-38
Advertisement
Table of Contents
