Table of Contents
Advertisement
2-2-3 Receiving a Call
When somebody calls you, the phone rings. Also, the ((
the telephone lamp on the left of the base will start to blink.
The callerÕs phone number will be displayed if the telephone network has transmitted the necessary
information.
1. If the handset is on the base, pick up the handset and speak. Or
If the handset is out of the base, open the flip cover and speak. Or
If the handset is in the Standby mode with the flip cover open, press
Note:
key and
in order to prevent the phone from being disengaged.
2. To end the call, close the flip cover or press
Note: If you set the ÔRing Delay TimeÕ feature, you can turn the handset ringer off for the specified time when a
call comes in and other handsets are ringing. Refer to ÔRing Delay TimeÕ on page 48.
Operations & Installation
key will not work for three seconds after the flip has been opened to receive a call
INT
)) icon in the middle of your handsetÕs display and
key.
key.
2-12
Advertisement
Table of Contents
