VESPA LX 4T USA Workshop Manual page 119

LX 4T USA
Engine
- Use battery to power the automatic starter and
check that piston protrudes as much as possible.
- The correct warm up time depends on the ambi-
ent temperature.
- If protrusion, resistance or timing values are dif-
ferent from the ones prescribed, replace the start-
er.
Characteristic
Battery
12V-9Ah
max. protrusion
15 mm
max. time
15 min
- Fit the starter, the support bracket and the pro-
tection with the screw indicated in the figure.
- Insert rubber pipes for tank ventilation.
- Insert the O-Ring, the washer, the spring and the
idle flow screw in their seatings.
ENG - 119