Getting Started With Your Water Flosser - Waterpik WP–700 Instructions Manual

Inserting and Removing Tips
Insert tip into the center of the Water Flosser handle. The
colored ring will be flush with the top of the handle if the tip
is correctly locked into place.
To remove tip from the handle slide
NO
Gap
the tip eject button up towards the
top of the handle and lift tip from
handle.
Tip Insertion and
Removal
Slide
Button
Up

GETTING STARTED WITH YOUR WATER FLOSSER

Powering the Unit
Plug the cord into an electrical outlet. If the outlet is
controlled by a wall switch, be sure it is turned on.
Preparing the Reservoir
Remove the reservoir and fill with lukewarm water.
Replace the reservoir over the base and press
down firmly.
Fill
Replace
O
I
2
1
3
7