Getting Started With Your Sonic Toothbrush/Care Of Your Sonic Toothbrush - Waterpik WP–700 Instructions Manual

12
GETTING STARTED WITH YOUR SONIC TOOTHBRUSH/
CARE OF YOUR SONIC TOOTHBRUSH
Battery insertion
To insert the battery:
1. Unscrew the battery cap.
2. Insert the AAA alkaline battery into brush with
positive end first.
3. Screw on the battery cap. Replace the AAA alkaline
battery with a new AAA alkaline battery when it is
exhausted.
Sonic brushing
• Slide the brush head onto the handle. Push the brush
head down until it is fully seated on the handle.
• Place the brush head into your mouth before turning
the unit on.
• For best results, position brush along gumline at a
45-degree angle toward the gum.
Insert
• Use light pressure with a gentle back and forth motion
covering one or two teeth at a time. Overlap the teeth
as you work your way around the mouth.
• Move the brush slowly around entire mouth.
Cleaning
1. After each use, turn off unit, and rinse as you would a
manual toothbrush.
2. Wipe the handle dry after each use.
Service
Other than the replaceable battery, the sonic toothbrush
has no consumer serviceable electrical items and does
not require routine service maintenance. For all your
service needs go to www.waterpik.com/intl to find your
local distributor. Please do not ship product to Waterpik
International, Inc. offices, this will delay service.
Battery Disposal
Please dispose of the replaceable battery per local
disposal guidelines and/or laws.