Marson MT6222 Quick Manual

2D Fixed
Barcode Scanner
Quick Guide
2D Fixed Barcode Scanner Quick Guide (Rev2)
P/N: 8013-0055001

STEP1 - CONNECT TO HOST

USB Connection

1. Connect the scanner to the host.
2. The scanner will be powered by the USB connection.
USB (Type A Male):
Pin Signal
1 +5VCC
2 Data -
3 Data +
4 GND

RS232 Connection

1. Connect the scanner to the host.
2. Supply power directly to Pin 9 or plug power adapter
to the DC Jack. The scanner will be powered up.
RS232 (D-Sub 9 Female):
Signal
Pin
2 TXD(Out)
3 RXD(In)
5 GND
7 CTS(In)
8 RTS(Out)
9 +5VCC

SPECIFICATIONS

Light source 625nm visible red LED
Aimer 650nm visible red Laser
Scan rate 60 frames/sec
Resolution 5mil/ 0.127mm
PCS 30%
Width of Field 131mm (13Mil Code39)
Depth of Field 5 Mil Code39: 55 - 160mm
10 Mil Code39: 65 - 270mm
13 Mil UPC/EAN: 65 - 285mm
10 Mil DataMatrix: 50 - 125mm
10 Mil QR Code: 65 - 130mm
Dimension W56 x L41 x H20 mm
Housing ABS (Housing), PC (Back Cover)
Weight 120g ± 10g
Cable Length 90cm/35.4in (Fixed Cable)
Interface RS232, USB HID, USB VCP
Voltage 5VDC±5%
< 320mA
Working Current
< 100mA
Standby Current
-10 to 55˚C (14˚F to 131˚F)
Operating Temp.
Storage Temp. -20 to 65˚C (-4˚F to 149˚F)
Ambient Light 30,000 lux
Drop Durability 1.5M
Sealing IP55
Symbologies QR Code, DataMatrix, PDF417 and all
major 1D barcodes

STEP2 - CONFIGURE INTERFACE

USB Connection
1. By default, barcode data will be sent as HID keyboard
input (USB HID).
2. Below configuration barcodes allow you to switch
between two USB modes (USB HID & USB VCP)
3. For USB VCP driver, please download it from our web-
site or contact your local distributor.
4. Only USB VCP interface allows you to enable software
trigger (see back page for details)
. C008$
USB HID
. C006$
USB VCP
RS232 Connection
1. By default, barcode data will be transmitted by the
communication protocols of 9600-8-N-1
2. RS232 interface allows you to enable software trigger
(see back page for details)
DIMENSION
Top View
56mm
Front View
Side View

STEP3 - POSITION SCANNER

1. Maximum Scan Angle: Skew ±55˚, Pitch ±55˚, Tilt ±360˚
Skew ±55˚
Tilt ±360˚
Pitch ±55˚
2. Pitch the scanner at a minimum of ±5˚ to avoid specular
reflection.
Scanner
(Side View)
Barcode
SCANNING RANGE
(Top View)
Unit: MM
41mm
Auto-sensing Area
20mm
36˚
Barcode Scanning
Area

STEP4 - INSTALL SOFTWARE UTILITY

Based on different hardware & configuration method,
there are 2 types of software utility:
EZU
1. Software - works with USB HID interface
BEO
2. Software - works with RS232 & USB VCP
and supports command operation
Both are available for download from below link:
Please visit www.marson.com.tw
and enter MT6222 > Downloads
Or simply scan below barcode by smartphone