Subscribe to Our Youtube Channel
Related Manuals for Marson MT8210P
Summary of Contents for Marson MT8210P
- Page 1 MT8210P User’s Manual V1.1 MT8210P 2D Handheld Scanner User’s Manual Version 1.1 DATE: 2023/02/24...
-
Page 2: Table Of Contents
MT8210P User’s Manual V1.1 Table of Content CHAPTER 1 GENERAL SETTINGS ............................6 ................................. 6 ARCODE ONFIGURABILITY ..................................6 ACTORY EFAULT .................................... 6 HECK ERSION ................................7 NDICATOR Beep Tone ....................................7 Vibrator ..................................... 7 Indicator LED ................................... 7 ....................................8 ORMAT UTF-8/Shift-JIS to Unicode Conversion .......................... - Page 3 MT8210P User’s Manual V1.1 CHAPTER 4 DATA FORMAT ............................... 22 ID ....................................... 22 ID ......................................22 ....................................24 ENGTH ....................................24 REAMBLE ....................................25 OSTAMBLE Clear Preamble/Postamble ..............................25 ....................................25 ERMINATOR CHAPTER 5 SYMBOLOGIES .............................. 26 ..................................26 ENERAL ETTINGS UPC-A ......................................
- Page 4 MT8210P User’s Manual V1.1 Enable/Disable Code 32 ..............................36 Leading/Tailing ..................................36 93 ...................................... 37 Enable/Disable Code 93 ..............................37 Code 93 Min/Max Length ..............................37 11 ...................................... 38 Enable/Disable Code 11 ..............................38 Code 11 Min/Max Length ..............................38 (NW-7)..................................
- Page 5 MT8210P User’s Manual V1.1 ......................................51 ZTEC Enable/Disable Aztec ................................51 CHAPTER 6 APPENDIX ............................... 52 ................................. 52 PPENDIX UMBERS ............................53 PPENDIX PPER LPHABETS ............................55 PPENDIX OWER LPHABETS – C ..............................57 PPENDIX ONTROL ODES – S ................................. 59...
-
Page 6: Chapter 1 General Settings
MT8210P User’s Manual V1.1 Chapter 1 General Settings Barcode Configurability Scanning below configuration barcodes will allow/prohibit user to change settings by scanning configuration barcodes in this manual. Enable Barcode Configurability* Disable Barcode Configurability Factory Default Scanning below configuration barcode will reset all parameters to factory default settings (the ones... -
Page 7: Good Read Indicator
MT8210P User’s Manual V1.1 Good Read Indicator Beep Tone Beep Low (2.0KHz) Beep Medium (2.7KHz)* Beep High (4.0KHz) Vibrator Off* Indicator LED... -
Page 8: Data Format
MT8210P User’s Manual V1.1 Data Format UTF-8/Shift-JIS to Unicode Conversion Disable* UTF-8 to Unicode (Word) Shift-JIS Shift-JIS to Unicode (Notepad) (Word) HT/CR/ESC Converts to TAB/ENTER/ESCAPE Off* Note: 1. By default, HT [$I], CR [$M] and ESC [%A] is transmitted as <0x09>, <0x0D> and <0x1B>... -
Page 9: Function Code Conversion
MT8210P User’s Manual V1.1 Function Code Conversion Note: Once disabled, the scanner will output the original encoded data of the barcodes in Appendix - Function/Navigation/Modifier Keys. Control Code Output Method Ctrl Mode* Alt Mode Disable Output Note: Control code (0x01 ~ 0x1A) can be sent by two methods: (1) Ctrl Mode: A barcode of “A<HT>F”... - Page 10 MT8210P User’s Manual V1.1 Since “Ctrl+I” is shortcut for italicizing text in some software applications, the result of above output sequence can be a regular A plus an italic F. (2) Alt Mode: For <HT>, the output sequence of virtual keyboard is: Enter “Alt + 0 + 0 + 0 + 9”...
-
Page 11: Numeric Key
MT8210P User’s Manual V1.1 28 Alt+0+0+2+8 Alt+0+0+2+8 29 Alt+0+0+2+9 Alt+0+0+2+9 30 Alt+0+0+3+0 Alt+0+0+3+0 31 Alt+0+0+3+1 Alt+0+0+3+1 Numeric Key Numeric Key Alphanumeric Key* Note: 1. By default, the alphanumeric key is used for trasmitting digits. Scan NUMERIC KEY if you want to use the keys on the numeric keypad. -
Page 12: Imaging Settings
MT8210P User’s Manual V1.1 Capslock Free Note: When barcode scanner is set to Capslock Free mode, no matter keyboard Capslock LED indicator is ON or OFF, output will be always the same as the Original barcode. In other words, what you see is what output is. -
Page 13: Chapter 2 Interface
MT8210P User’s Manual V1.1 Chapter 2 Interface USB HID USB HID Keyboard Layout English (US)* English (UK) Danish Spanish Hungarian (QWERTZ) Hungarian (QWERTY) Canadian French Dutch... - Page 14 MT8210P User’s Manual V1.1 Italian French German Swiss German Swiss French Swedish Czech (QWERTZ) Czech (QWERTY) Norwegian Belgian Portuguese Slovak Brazilian (QWERTY) Canadian (Traditional)
-
Page 15: Intercharacter Delay
MT8210P User’s Manual V1.1 Japanese Alt Code Intercharacter Delay The configurable range is from 0 to 255ms. The larger the number, the longer the delay. Set Intercharacter Delay (Default = 0ms) Example: Set Intercharacter Delay to 8ms Step1: Scan Set Intercharacter Delay Step2: Scan “0”... -
Page 16: Usb Vcp
MT8210P User’s Manual V1.1 USB VCP USB VCP RS232 RS232 Baud Rate 1200 2400 4800 9600* 19200 38400... -
Page 17: Data Bits & Parity
MT8210P User’s Manual V1.1 57600 115200 Data Bits & Parity 8 Bits Even 8 Bits Odd 8 Bits Space 8 Bits Mark 8 Bits None* 7 Bits Even 7 Bits Odd 7 Bits Space 7 Bits Mark... -
Page 18: Stop Bits
MT8210P User’s Manual V1.1 Stop Bits 1 Stop Bit* 2 Stop Bits Handshaking None* RTS enable at Power On RTS enable with Communication ACK/NAK Off* BCC (Binary Check Character) Off*... -
Page 19: Chapter 3 Reading Mode
MT8210P User’s Manual V1.1 Chapter 3 Reading Mode Trigger Mode In Trigger Mode the LED will stay on once trigger is pressed and held, and will turn off automatically once a barcode is read or LED Auto-Off timeout expires. Trigger Mode... -
Page 20: Batch Mode
MT8210P User’s Manual V1.1 Batch Mode In Batch Mode the LED will stay on when trigger is pressed and held, during which the scanner will read each unique barcode once. It cannot be read again until the next cycle. Batch Mode Auto-sensing Mode In Auto-sensing Mode the LED will turn off automatically after LED Auto-Off timeout expires. -
Page 21: Trigger / Toggle / Auto-Sensing Mode - Led Auto-Off Timeout
MT8210P User’s Manual V1.1 Trigger / Toggle / Auto-sensing Mode – LED Auto-Off Timeout The configurable range is 0.1 ~ 125 sec. 3 digits must be programmed during the multi-step configuration. (001 = 0.1 sec, 002 = 0.2 sec, 003 = 0.3 sec, 004 = 0.4 sec, 005 = 0.5 sec, 0.6 = 1 sec, 007 = 1.5 sec, 008 = 2.0 sec, 009 = 2.5 sec, 010 = 3 sec, .. -
Page 22: Chapter 4 Data Format
MT8210P User’s Manual V1.1 Chapter 4 Data Format By default data format is as follows: <Preamble> <Code ID> <Barcode Length> <Barcode Data> <Postamble> <Terminator> Code ID Disable Code ID* Enable Factory ID Enable Set ID Set ID Set ID can be 0 ~ 2 alphanumerics for each symbology. - Page 23 MT8210P User’s Manual V1.1 Set ID – EAN-8 Set ID – UPC-A Set ID – UPC-E Set ID – Interleaved 2 of 5 Set ID – Matrix 2 of 5 Set ID – Industrial 2 of 5 Set ID – Code93 Set ID –...
-
Page 24: Data Length
MT8210P User’s Manual V1.1 Set ID – Aztec Example: Set Code39 Set ID as XY" Step1: Scan “Set ID – Code39” Step2: Scan “X” “Y” in Appendix - Upper Case Alphabets Step3: Scan “Set ID – Code39” Data Length Send Data Length Off*... -
Page 25: Postamble
MT8210P User’s Manual V1.1 Postamble Postamble can be up to 16 bytes of data. Set Postamble Example: Set XYZ123 as Postamble Step 1: Scan “Set Postamble” Step 2: Scan “X” “Y” “Z” “1” “2” “3” in Appendix - Upper Case Alphabets & Numbers Step 3: Scan “Set Postamble”... -
Page 26: Chapter 5 Symbologies
MT8210P User’s Manual V1.1 <TAB> <Space> <ESC> Chapter 5 Symbologies General Settings Enable All Symbologies Disable All Symbologies Enable All 1D Symbologies Disable All 1D Symbologies Enable All 2D Symbologies Disable All 2D Symbologies Note: When all symbologies are disabled, configuration barcodes are still readable. -
Page 27: Upc-A
MT8210P User’s Manual V1.1 UPC-A Enable/Disable UPC-A Enable UPC-A* Disable UPC-A Check Digit Send Check Digit* Not Send Check Digit Lead Digit (System Number) Send Lead Digit* Not Send Lead Digit Supplement 5-digit Supplement On 5-digit Supplement Off*... -
Page 28: Upc-A To Ean-13
MT8210P User’s Manual V1.1 2-digit Supplement On 2-digit Supplement Off* UPC-A to EAN-13 Enable UPC-A to EAN-13 Disable UPC-A to EAN-13* UPC-E Enable/Disable UPC-E Enable UPC-E* Disable UPC-E Check Digit Send Check Digit* Not Send Check Digit Lead Digit (System Number) -
Page 29: Supplement
MT8210P User’s Manual V1.1 Supplement 5-digit Supplement On 5-digit Supplement Off* 2-digit Supplement On 2-digit Supplement Off*... -
Page 30: Ean-8
MT8210P User’s Manual V1.1 EAN-8 Enable/Disable EAN-8 Enable EAN-8* Disable EAN-8 Check Digit Not Send Check Digit Send Check Digit* Supplement 5-digit Supplement On 5-digit Supplement Off* 2-digit Supplement On 2-digit Supplement Off*... -
Page 31: Ean-13
MT8210P User’s Manual V1.1 EAN-13 Enable/Disable EAN-13 Enable EAN-13* Disable EAN-13 Check Digit Not Send Check Digit Send Check Digit* Supplement 5-digit Supplement On 5-digit Supplement Off* 2-digit Supplement On 2-digit Supplement Off*... -
Page 32: Isbn
MT8210P User’s Manual V1.1 ISBN Off* ISSN Off*... -
Page 33: Code 128/Gs1-128(Ucc/Ean 128)
MT8210P User’s Manual V1.1 Code 128/GS1-128(UCC/EAN 128) Enable/Disable Code 128 Enable Code 128/GS1-128* Disable Code 128/GS1-128 Code128/GS1-128 Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 99) Example: Set Min Length as 8, Max Length as 12 for Code128/GS1-128 Step1: Scan “Set Min Length”... -
Page 34: Code 39
MT8210P User’s Manual V1.1 Code 39 Enable/Disable Code 39 Enable Code 39* Disable Code 39 Verification Disable CDV* CDV & Send CD CDV & Not Send CD Start/Stop Not Send Start/Stop* Send Start/Stop*... -
Page 35: Full Ascii Code39
MT8210P User’s Manual V1.1 Full ASCII Code39 Enable Full ASCII Code39* Disable Full ASCII Code39 Code39 Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 99) Example: Set Min Length as 8, Max Length as 12 for Code39 Step1: Scan “Set Min Length”... -
Page 36: Code 32
MT8210P User’s Manual V1.1 Code 32 Enable/Disable Code 32 Enable Code 32 Disable Code 32* Notw: Please make sure Code39 is enabled with verification disabled before enabling Code32. Leading/Tailing Not Send Leading & Tailing Send Leading Only Send Tailing Only... -
Page 37: Ode 93
MT8210P User’s Manual V1.1 Code 93 Enable/Disable Code 93 Enable Code 93* Disable Code 93 Code 93 Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 99) Example: Set Min Length as 8, Max Length as 12 for Code93 Step1: Scan “Set Min Length”... -
Page 38: Code 11
MT8210P User’s Manual V1.1 Code 11 Enable/Disable Code 11 Enable Code 11 Disable Code 11* Code 11 Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 99) Example: Set Min Length as 8, Max Length as 12 for Code11 Step1: Scan “Set Min Length”... -
Page 39: Codabar (Nw-7)
MT8210P User’s Manual V1.1 Codabar (NW-7) Enable/Disable Codabar Enable Codabar* Disable Codabar Verification Disable CDV* CDV & Send CD CDV & Not Send CD Start/Stop Not Send Start/Stop ST/SP: ABCD/ABCD*... -
Page 40: Codabar Min/Max Length
MT8210P User’s Manual V1.1 ST/SP: abcd/abcd ST/SP: ABCD/TN*E ST/SP: abcd/tn*e Codabar Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 99) Example: Set Min Length as 8, Max Length as 12 for Codabar Step1: Scan “Set Min Length”... -
Page 41: Interleaved 2 Of 5
MT8210P User’s Manual V1.1 Interleaved 2 of 5 Enable/Disable Interleaved 2 of 5 Enable Interleaved 2 of 5* Disable Interleaved 2 of 5 Verification Disable CDV* CDV & Send CD CDV & Not Send CD... -
Page 42: Interleaved 2 Of 5 Min/Max Length
MT8210P User’s Manual V1.1 Interleaved 2 of 5 Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 99) Example: Set Min Length as 8, Max Length as 12 for Interleaved 2 of 5 Step1: Scan “Set Min Length”... -
Page 43: Matrix 2 Of 5
MT8210P User’s Manual V1.1 Matrix 2 of 5 Enable Disable Matrix 2 of 5 Enable Matrix 2 of 5 Disable Matrix 2 of 5* Verification Disable CDV* CDV & Send CD CDV & Not Send CD... -
Page 44: Matrix 2 Of 5 Min/Max Length
MT8210P User’s Manual V1.1 Matrix 2 of 5 Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 99) Example: Set Min Length as 8, Max Length as 12 for Matrix 2 of 5 Step1: Scan “Set Min Length”... -
Page 45: Industrial 2 Of 5
MT8210P User’s Manual V1.1 Industrial 2 of 5 Enable/Disable Industrial 2 of 5 Enable Industrial 2 of 5 Disable Industrial 2 of 5* Verification Disable CDV* CDV & Send CD CDV & Not Send CD... -
Page 46: Industrial 2 Of 5 Min/Max Length
MT8210P User’s Manual V1.1 Industrial 2 of 5 Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 99) Example: Set Min Length as 8, Max Length as 12 for Industrial 2 of 5 Step1: Scan “Set Min Length”... -
Page 47: Standard 2 Of 5 (Iata)
MT8210P User’s Manual V1.1 Standard 2 of 5 (IATA) Enable/Disable Standard 2 of 5 Enable Industrial 2 of 5 Disable Industrial 2 of 5* Verification Disable CDV* CDV & Send CD CDV & Not Send CD... -
Page 48: Standard 2 Of 5 Min/Max Length
MT8210P User’s Manual V1.1 Standard 2 of 5 Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 99) Example: Set Min Length as 8, Max Length as 12 for Standard 2 of 5 Step1: Scan “Set Min Length”... -
Page 49: Msi Plessey
MT8210P User’s Manual V1.1 MSI Plessey Enable/Disable MSI Plessey Enable MSI Plessey Disable MSI Plessey* MSI Plessey Min/Max Length Set Min Length Set Max Length (Default = 01) (Default = 99) Example: Set Min Length as 8, Max Length as 12 for MSI Plessey Step1: Scan “Set Min Length”... -
Page 50: Qr Code
MT8210P User’s Manual V1.1 QR Code Enable/Disable QR Code Enable QR Code* Disable QR Code Micro QR Code Enable/Disable Micro QR Code Enable Micro QR Code Disable Micro QR Code* Data Matrix Enable/Disable Data Matrix Enable Data Matrix* Disable Data Matrix... -
Page 51: Pdf417
MT8210P User’s Manual V1.1 PDF417 Enable/Disable PDF417 Enable PDF417* Disable PDF417 MicroPDF417 Enable/Disable MicroPDF417 Enable MicroPDF417* Disable MicroPDF417 Aztec Enable/Disable Aztec Enable Aztec Disable Aztec*... -
Page 52: Chapter 6 Appendix
MT8210P User’s Manual V1.1 Chapter 6 Appendix Appendix - Numbers... -
Page 53: Appendix - Upper Case Alphabets
MT8210P User’s Manual V1.1 Appendix - Upper Case Alphabets... - Page 54 MT8210P User’s Manual V1.1...
-
Page 55: Appendix - Lower Case Alphabets
MT8210P User’s Manual V1.1 Appendix - Lower Case Alphabets... - Page 56 MT8210P User’s Manual V1.1...
-
Page 57: Appendix - Control Codes
MT8210P User’s Manual V1.1 Appendix – Control Codes... - Page 58 MT8210P User’s Manual V1.1...
-
Page 59: Appendix - Symbols
MT8210P User’s Manual V1.1 Appendix – Symbols &... - Page 60 MT8210P User’s Manual V1.1 < > “ ‘...
- Page 61 MT8210P User’s Manual V1.1...
-
Page 62: Appendix - Function Keys
MT8210P User’s Manual V1.1 Appendix – Function Keys Home Enter (Numeric Key) -
Page 63: Appendix - Navigation Keys
MT8210P User’s Manual V1.1 Appendix – Navigation Keys Cursor Left Cursor Right Cursor Up Cursor Down Page Up Page Down Back Tab Enter... -
Page 64: Appendix - Modifier Keys
MT8210P User’s Manual V1.1 Appendix – Modifier Keys Alt (Left) make *1 Alt (Left) break Alt (Right) make Alt (Right) break Shift (Left) make *2 Shift (Left) break Shift (Right) make Shift (Right) break Win (Left) make Win (Left) break... -
Page 65: Appendix - Abort
MT8210P User’s Manual V1.1 Ctrl (Left) make *3 Ctrl (Left) break Ctrl (Right) make Ctrl (Right) break Note: *1: When “Alt (Left) make” is programmed, please scan “Alt (Left) break” to resume barcode setting. *2: When “Shift (Left) make” is programmed, please scan “Shift (Left) break” to resume barcode setting. -
Page 66: Appendix - Default Table
MT8210P User’s Manual V1.1 Appendix - Default Table Function Default Remark General Settings Barcode Configurability Beep Tone Medium (2.7KHz) Vibrator Indicator LED Data Format UTF-8/Shift-JIS to Unicode Conversion HT/CR/ESC Converts to TAB/ENTER/ESCAPE Function Code Conversion Control Code Output Method Ctrl Mode... - Page 67 MT8210P User’s Manual V1.1 Auto-sensing Mode – Magnetic Switch ON Trigger / Toggle / Auto-sensing 3 sec Mode – LED Auto-Off Timeout Data Format Code ID Disable Set ID Data Length Preamble Postamble Terminator Symbologies General Settings UPC-A Enable/Disable Check Digit...
- Page 68 MT8210P User’s Manual V1.1 Start/Stop Not Send Full ASCII Code39 Min Length Max Length Code 32 Enable/Disable Leading/Tailing Send Leading & Tailing Code 93 Enable/Disable Min Length Max Length Code 11 Enable/Disable Min Length Max Length Codabar Enable/Disable Verification Disable CDV...
- Page 69 MT8210P User’s Manual V1.1 Max Length MSI Plessey Enable/Disable Min Length Max Length QR Code Enable/Disable Micro QR Code Enable/Disable Data Matrix Enable/Disable PDF 417 Enable/Disable Micro PDF 417 Enable/Disable Aztec Enable/Disable...
-
Page 70: Appendix - Factory Id
MT8210P User’s Manual V1.1 Appendix - Factory ID Symbology Code ID UPC-E UPC-A EAN-8 EAN-13 Code 128 GS1-128 Code 39/Code32 Code 93 Code 11 Codabar Interleaved 2 of 5 Matrix 2 of 5 Industrial 2 of 5 Standard 2 of 5 (IATA 2 of 5) -
Page 71: Appendix - Ascii Table
MT8210P User’s Manual V1.1 Appendix - ASCII Table Note: ASCII 0~31 are non-printable characters, ASCII 32~127 are printable characters. ASCII NUL (Null char.) SOH (Start of Header) STX (Start of Text) ETX (End of Text) EOT (End of Transmission) ENQ (Enquiry) - Page 72 MT8210P User’s Manual V1.1 # (Number Sign) $ (Dollar Sign) % (Percent) & (Ampersand) ` (Single Quote) ( (Right / Closing Parenthesis) ) (Right / Closing Parenthesis) * (Asterisk) + (Plus) , (Comma) - (Minus / Dash) . (Dot) / (Forward Slash) : (Colon) ;...
- Page 73 MT8210P User’s Manual V1.1 [ (Left / Opening Bracket) \ (Back Slash) ] (Right / Closing Bracket) ^ (Caret / Circumflex) _ (Underscore) ' (Grave Accent)
- Page 74 MT8210P User’s Manual V1.1 { (Left/ Opening Brace) | (Vertical Bar) } (Right/Closing Brace) ~ (Tilde) DEL (Delete)
-
Page 75: Version History
MT8210P User’s Manual V1.1 Version History Date Description Issued 2021.07.14 Initial Release Shaw 2023.02.24 FW: HM3-s-1.01.G1 Shaw Added Control Code Output Method Added Shift-JIS to Unicode Conversion...
Need help?
Do you have a question about the MT8210P and is the answer not in the manual?
Questions and answers