Battery; Bypassing Protected Areas; Change Time And Date - GE Security Concord 4 Quick Manual

Battery

The Concord 4 operates on a

Loss of AC power and use of backup battery power is indicated by NO AC.

A low battery condition is indicated by BAT.

For instructions on replacing your battery, please visit our


Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed. There
are two ways to bypass a zone: directly and indirectly.
To bypass a zone directly, first arm your system as normal.

Then, press [# Bypass] + enter your [security code].

The display will read "BYPASS SENSOR" _ _ " or "ENTER SNSR _ _".

Enter the desired sensor number.

The display will confirm with 'BYPASSED ZONES _ _" or "SENSOR _ _ BYPASS".

Continue to bypass more zones. If no more zones are desired, walk away, the system is armed.

To unbypass a zone, repeat the direct bypass process or close the bypassed doors/windows and arm

your system.
To bypass a zone indirectly, leave the desired doors/windows open and arm your system normally.

The display will read "PRO-TEST". This is because sensors have been left open.

When the display reads "PRO-TEST", press [# Bypass]. The display will read "BYPASSES ZONES _ _" or

"SENSOR _ _ BYPASSED".
The system will sound arming level beeps to indicate that the system is armed and the open sensors

(doors./window) have been successfully bypassed.
The system is now armed with zones bypassed.

To unbypass a zone, close the bypassed zones and arm your system normally.


Change Time and Date

To change the system date:
Press [9] + [Master code] + [0] + [2] + [1].

Enter the current date as 6-digits, i.e., 082314 for August 23, 2014, then press [#].

Press [*] + [0] + [0] + [#] to exit.

UB 1270 battery.
Battery Replacement Page.