Cisco DMP 4305G Getting Started Manual page 44

Secure Data
Procedure
Step 1 Click Browser in the Settings list.
Enter a new duration in milliseconds in the Splash Screen Display Time (in milliseconds) field.
Step 2
Click Apply.
Step 3
Click Save Configuration in the Administration list, and then click Save.
Step 4
Stop. You have completed this procedure.
Step 5
Protect Your DMP from Unauthorized Management
Caution Configure your network firewall to restrict access to DMPs over TCP port 7777. Permit such access from only the DMM
appliance where your fully licensed copy of Cisco Digital Signs is installed. If you do not know how to define an access control list
(ACL), ask the security policy administrator for your network or see the manufacturer documentation for your firewall.
When you use Cisco Digital Signs to manage a network of DMPs centrally, you must configure each
DMP to secure and trust its communication with Cisco Digital Signs.
Before You Begin
•
Procedure
Click Centralized Management in the Settings list.
Step 1
Enter in the Digital Signs Server Timeout (sec) field the maximum number of seconds that your DMP
Step 2
should wait for a response from your DMM appliance.
Getting Started Guide for Cisco Digital Media Players
44
Log in to DMPDM.
78-19212-02