Cisco DMP 4305G Getting Started Manual page 28

Hide thumbs Also See for DMP 4305G:
Table of Contents

Advertisement

Connect Equipment
Do only one of the following.
Step 3
Turn On the touchscreen.
Step 4
Tip
Stop. You have completed this procedure.
Step 5
Related Topics
Connect to an Analog Display or Projector
Tip
DMPs support connections to analog presentation systems,. However, we recommend strongly that you use digital
presentation systems whenever possible.
Procedure
Make connections for video.
Step 1
a.
b.
Make connections for audio.
Step 2
a.
b.
If the presentation system is not already turned on, turn it On now.
Step 3
Stop. You have completed this procedure.
Step 4
Getting Started Guide for Cisco Digital Media Players
28
Connect a USB cable to the USB interface on the back panel of your DMP. Then, connect the other
end to your touchscreen.
Does your DMP model have only one USB connector? If so, you might prefer to connect an external
hard drive there for added local storage. In this case, an RS-232 serial cable would be the better
choice for connecting a touchscreen to your DMP.
Connect an RS-232 serial cable to the RS232 interface on the back panel of your DMP. Then,
connect the other end to your touchscreen.
Does a message on the touchscreen say that it must download a "characterization" file? This happens only
when your touchscreen uses technologies from Elo TouchSystems and when you have never turned it On previously (or
after its flash memory card is reformatted). When you see this message, please disregard it. The touchscreen will obtain
its characterization file automatically during a later stage of DMP setup.
Physical Interfaces (I/O Ports), page 12
Choose and Calibrate a Touchscreen Driver, page 37
Plug one yellow jack from the RCA video cable into the CVBS interface on the back panel of
your DMP.
Connect the free end of this cable to the corresponding interface on your presentation system.
Plug the 3mm jack on the RCA audio cable into the AUDIO interface on the back panel of
your DMP.
Connect the free end of this cable to the corresponding interface on your presentation system.
78-19212-02

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmp 4310gDmp 4400g

Table of Contents