Cisco DMP 4305G Getting Started Manual page 43

Understand URI Encoding Syntax
When you enter the text string in Cisco Digital Signs to change a DMP password, that string must use
the correct syntax for URI encoding.
•
•
•
Tip Would you like to learn more about URI encoding and syntax? If so, see RFC 1630 at http://tools.ietf.org/html/rfc1630.
Procedures (Security)
•
•
•
Edit the Splash Screen Duration to Obscure the DMP IP Address
Timesaver Complete this optional procedure at your discretion.
You can change how long your DMP shows its splash screen during startup. This is useful when, for
example, your organization prefers not to reveal an IP address casually to all observers.
•
•
•
Before You Begin
•
78-19212-02
You must enter a plus sign (+) instead of a space wherever the value for a queryable object should
contain a space. For example, if the queryable object is "user" and its value is "John Smith," you
would enter "user=John+Smith" in your string.
Do any values in the string contain an actual plus sign? If so, you must encode the plus sign
explicitly as %2B.
Exclamation points (!), question marks (?), ampersands (&), and asterisks (*) are forbidden
in values.
Edit the Splash Screen Duration to Obscure the DMP IP Address, page 43
Protect Your DMP from Unauthorized Management, page 44
Manage Passwords, page 45
A duration of 30,000 milliseconds (30 seconds) is the factory default.
A duration of 1 millisecond turns off the splash screen.
Any duration in the range from 2 to 5,000 milliseconds (5 seconds) does not have any effect.
Log in to DMPDM.
Getting Started Guide for Cisco Digital Media Players
Secure Data
43