D E -Registration - GE 21028 User Manual

8. Press and hold the page button on the base unit until you hear a long tone
at the handset. HANDSET X REGISTERED shows in the handset display,
where X is the handset number. You will hear a confirmation tone.
NOTE: After you have registered one handset, wait 10 seconds before
registering another handset to ensure successful registration.
D -R
E EGISTRATION
Deregistration cancels registration. During the de-registration process,
keep the handset near the base.
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CID/VOL (
4. Press MUTE/PROG button to confirm.
5. If necessary, press the CID/VOL (
DEREGISTRATION menu. Then, press MUTE/PROG button to enter the
menu. DEREGISTRATION? 1YES 2NO shows in the display. The default
is 2NO .
6. Use the touch-tone pad to select 1 for YES or 2 for NO . Or use the CID/
VOL ( or ) button to scroll to 1YES or 2NO .
WARNING: It is not recommended that a handset be de-registered unless
absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.
7. Select NO , if you do not want to deregister.
8. If you select 1YES , press the MUTE/PROG button and MOVE NEAR
TO BASE displays for 2 seconds, then CONFIRM? 1YES 2NO appears
in the display.
9. Press the touch-tone pad to select 1YES or 2NO , or use the CID/VOL (
or ) button to scroll to 1YES or 2NO .
10. If you select YES , press the MUTE/PROG button to confirm.
DE-REGISTER ..... shows in the display followed by a confirmation tone.
Then HANDSET X DEREGISTERED shows in the display to confirm the
handset is deregistered.
or ) button to scroll to HANDSET SETUP.
or ) button to scroll to the
27