Umber In; Dialed - GE 21028 User Manual

S N
TORING A AME AND
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM button to display SELECT MEMORY 01-50 .
3. Press the desired memory location button (01 through 50) or use the
CID/VOL ( or
NOTE: If the memory location is occupied, the memory location number and
stored name and telephone number appear in the display. If the memory
location is empty, EMPTY appears in the display.
4. Press the MEM button. The display shows ENTER NAME .
5. Use the touch-tone pad to enter a name (up to 15 characters). More than
one letter is stored in each of the number keys. For example, to enter Bill
Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the
letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for
the second letter L, and press the 1 key to insert a space between the first
and last name. Press the 7 key 4 times for the letter S; press the 6 key once
for the letter M; press the 4 key 3 times for the letter I; press the 8 key for
the letter T; press the 4 key twice for the letter H.
NOTE: If you make a mistake press the DEL button to backspace and erase
the wrong character(s) or number(s).
6. Press the MEM button to confirm and save the record. The display
shows ENTER TEL NUMBR .
7. Use the touch-tone pad to enter the telephone number (up to 20 digits,
including pauses), and press the MEM button again to save the record.
The unit beeps to confirm.
NOTE: The system treats PAUSES as delays or spaces in the dialing sequence.
8. To enter another name and number in a different memory location,
return to step 2 and repeat the process.
S L
TORING THE
Make sure the phone is OFF (not in talk mode).
1. Repeat Step 1 through 6 in Storing a Name and Number in Memory
36
N

UMBER IN

) button to scroll to desired the memory location.
N D
AST UMBER
M
EMORY
IALED