Security Code; Ode - GE 21028 User Manual

5. Press the CID/VOL (
6. Press MUTE/PROG button to enter the menu. RING SELECT 3 4 5 6 TS
shows in the display.
7. Use the CID/VOL (
default setting is 5 .
8. Press the MUTE/PROG button to confirm. You will hear a confirmation
tone and the new setting shows in the display.
NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring if there
are NEW messages, OR the unit answers after the 5th ring if there are NO new
messages. This allows user to access their answerer from another location and
then hang up after 4 rings to save long distance charges.
S C
ECURITY

ODE

You can access the answering system from a tone dialing telephone in
another (remote) location. The security code is required for remote access,
and it prevents unauthorized access to your answering system.
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CID/VOL (
4. Press MUTE/PROG button to confirm.
5. Press the CID/VOL (
6. Press MUTE/PROG button to enter the menu. SECURITY CODE 1 2 3
shows in the display.
7. Use the touch-tone pad to enter your new 3-digit security code. The
default setting is 123 .
8. Press the MUTE/PROG button to confirm. You will hear a confirmation
tone and the new security code shows in the display.
NOTE: If you make a mistake, use the DEL button to backspace and erase the
wrong digit.
or ) button to scroll to the RING SELECT menu.
or ) button to scroll to the your selection. The
(
FOR ANSWERING MACHINE
or ) button to scroll to HANDSET SETUP.
or ) button to scroll to the SECURITY CODE menu.
)
25