Memory - GE 21028 User Manual

2. Press the Redial button.
3. Press MEM button again to confirm. You will hear a confirmation tone.
NOTE: If the redial number is longer than 20 digits, the redial number cannot
be stored in memory.
I P
NSERTING A AUSE IN THE
Press the #PAUSE button on the handset's touch-tone pad to insert a delay
in dialing sequence of a stored number when a pause is needed to wait
for a dial tone (for example, after you dial 9 for an outside line, or to
wait for a computer access tone.) Each pause counts as one digit in the
dialing sequence.
You can press the #PAUSE button to insert a P (pause) when you enter the
telephone number during memory storing.
R R
EVIEWING ECORDS
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM button to display SELECT MEMORY 01-50 .
3. Press the CID/VOL (
handset's touch-tone pad to enter the memory location number (01-50).
C R
HANGING ECORDS
Follow items 1 to 7 for Storing Names and Numbers in Memory.
D R
ELETING ECORDS
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM button to display SELECT MEMORY 01-50 .
3. Press the CID/VOL (
to delete or use the touch-tone pad to enter the desired memory
location (01-50).
4. Press the DEL button to mark the record for deletion. The display
shows DELETE?
5. Press the DEL button to delete the record. DELETED shows in the display.
NOTE: If you don't want to change or delete a record, simply press the
*EXIT button, or wait for one minute to exit the review mode automatically.
D S
IALING
S M
TORED IN EMORY
or ) buttons to scroll the records, or use the
S M
TORED IN EMORY
S M
TORED IN EMORY
or ) buttons to scroll to the record you want
( S
EQUENCE OF A
N
TORED UMBER
)
37