Reset Handset Default Setting; Registration; Change Dtmf/Pulse Dialing; De-Registration - GE 22428 User Manual

Reset Handset Default setting

By choosing 'Default' under 'Handset', user will be asked to confirm the resetting procedure.
C O N F I R M ?
Once confirmed, all the handset setting parameters will be reset to default values.

Registration

To register a handset to a base station, the base has to be ready for registration. The base will be ready
for registration for 2 minute when a page key is pressed and hold for 3 seconds.
After selecting 'REGSTER', the handset starts searching for a base station that is available for
registration. The 'Aerial' icon starts flashing.
S E A R C H I N G
If success, the registration procedure will be completed with a confirm tone. If fail, after
the registration procedure will be exited with an error tone.

Change DTMF/Pulse Dialing

The DTMF or pulse dialing mode can be selected by choosing 'Dial Mode' from the base setting
menu.
After selecting, the current dial mode is shown;
D T M F
P U L S E
Press [ / ] or [Menu/ ] to select DTMF or pulse dial mode. Press [INT / OK] to confirm or press
[C] to abort.

De-registration

One of the registered handset is able to remove the registration of another handset.
Select 'DEREG HS' from the menu, user will be asked to enter the handset number to be deleted
D E R E G :
For safety purpose, a handset cannot delete itself. So, the handset number is shown for other handset.
In case that there is only one handset registered, the de-registration procedure will be aborted.
Press [INT/OK] to proceed. That handset will no longer be able to access the base. The 'Aerial' icon
will disappear and 'NOT RGSTRD' will appear as shown.
?
19
60 seconds,