Flash /Call Waiting; Number Redial - GE 21028 User Manual

1. Press the #PAUSE/RINGER button to go to RINGER VOLUME menu. SET
RINGER 1HI 2LOW 3OFF shows in the display.
2. Use the touch tone pad on the handset to select 1HI, 2LOW or 3OFF, or
use the CID/VOl (
3. Press #PAUSE/RINGER button to save your selection. You will hear a
confirmation tone and the new volume setting shows in the display for 2
seconds and you will hear a confirmation tone.
F /C W
LASH ALL
If you subscribe to the combined Call Waiting Caller ID service from your
local telephone company, you will receive Caller ID information (if
available) on Call Waiting calls. During a phone call, you will hear a beep
to indicate another call is waiting on the line and the Caller ID information
for the waiting call shows on the handset display.
• To connect to the waiting call, press the FLASH/answerer button on the
handset, and your original call is put on hold.
• To switch between the two calls, press the FLASH/answerer button.
TIP: Don't press the TALK/END/CALLBACK button on the handset to activate
a custom calling service, such as call waiting, or you'll hang up the phone.
N R
UMBER EDIAL
You may redial a number up to 32 digits long.
To quickly redial the last number you dialed:
1. Press the TALK/END/CALLBACK or SPKR buttons.
2. Press the REDIAL button.
-OR-
To choose from the last three numbers you dialed:
1. Press the REDIAL button first, then use the CID/VOL (
select the desired redial number.
• Press the CID/VOL ( ) to review the oldest call and scroll toward the
most recent calls (higher numbers).
• Press the CID/VOL ( ) button to review the newest call and scroll to
older calls (lower numbers).
2. Press the TALK/END/CALLBACK or SPKR buttons. The number dials
automatically.
or ) button to scroll to your selection.
AITING
or ) button to
31